Action failed. Please refresh the page and retry.
motorcycle vibration reduction

Anti-Vibration Inserts

MSRP $59.99

Get rid of troubling vibration felt at your hands.

Quick installation, incredible difference.

The best kept secret in the pro pits, our Anti-Vibration Bar Inserts have been a staple since we introduced them in 1999.

A discreet, but incredibly effective component to any serious racer or casual rider, our inserts do a great job absorbing the vibration transferred from the bars to your hand yielding less fatigue and arm pump. Riders have been installing in them in anything with handlebars from quads to superbikes with great results.

Constructed out of brass with an elastomer expansion joint mounted inside of the handlebars. The Anti-Vibration Bar Insert kit comes with different end caps to work with most common wrap around handguards.

 

Features


    1. Reduces fatigue & armpump

      The design and materials used provides a smooth and incredibly controlled feel at the hands.


    1. Used by the best

      Many factory teams throughout the world use our anti-vibration inserts to increase control.


    1. Fits most aluminum handlebars

      We’ve created a few variations to fit almost any type of aluminum handlebar. They also work with most full-wrap handguards.


  1. 100% American Made.

    Take pride in where you purchase your products; we build 100% of this product right here in the US.

What’s in the box


  1. (2) anti-vibration inserts
  2. All pieces necessary for a complete installation

 

 

 

Application Chart

Applications Part Number
Flexx Handlebars ABI-200
7/8″ Aluminum (Renthal and most other aluminum 7/8″) ABI-200
1 1/8″ Aluminum (Renthal Fat Bar, Pro Taper and most oversized aluminum bars with 13.5mm I.D.) ABI-200
All Twin Wall / Double Wall ABITW-300

 

 

Handguard Installation Instructions

  1. Lightly Lubricate the o-ring and bar insert. To much grease will cause the bar insert to spin. Before installing in pro-taper style bars, remove the o-ring and install the insert to make sure that it fits all the way in. If it fits easily, try it with the o-ring on. The o-ring is optional, it may have to be removed on some bars.
  2. Install the bar insert by pushing only on the allen bolt with a 5mm allen wrench. If you press on the bar insert cap, you will not be able to push it all the way in. This will also damage the expansion piece.
  3. If installing with hand guards follow the diagram to the right.
  4. Tighten allen bolt snug, not too tight. Apply the grip over the bar and Bar Insert on the left side. Slide the throttle tube over the bar and Bar Insert on the right side.

Handguard Removal Instructions

  1. Loosen allen bolt and remove expansion piece. Reinstall the bolt and grab it with channel locks/pliers.
  2. Gently pull or pry on the Bar Insert out of the bar.

 

Handguard Installation


 

 

 

Installation Instructions

 

Handguard Installation

Additional Information

4.00 out of 5

1 review for Anti-Vibration Inserts

Add Your Own Review

  1. 4 out of 5

    Rating by Andy Bohr on Feb 7th 2012:

    I have these in my Pro-Taper 1 1/8 bars and I love them but I’m changing bars and going to a Fat Bar and I can’t remove the inserts. Any helpful tips would be appreciated. I really do like them but I can’t afford to buy another set at the moment.

    Thank you

    • out of 5

      Rating by admin on Feb 7th 2012:

      Hi Andy,

      We have a complete rebuild kit for $20.50, it includes everything but the brass. To remove them, try taking off the end cap and then threading the bolt back into the brass. Grab the bolt with a pair of pliers and work the insert out. You may want to spray some lube like WD 40 to help loosen up the grime. If you have any questions just give our tech department a call. Thanks!

Add a review

*

* Copy this password:

* Type or paste password here:

Frequently Asked Questions

Quick installation, incredible difference.

The best kept secret in the pro pits, our Anti-Vibration Bar Inserts have been a staple since we introduced them in 1999.

A discreet, but incredibly effective component to any serious racer or casual rider, our inserts do a great job absorbing the vibration transferred from the bars to your hand yielding less fatigue and arm pump. Riders have been installing in them in anything with handlebars from quads to superbikes with great results.

Constructed out of brass with an elastomer expansion joint mounted inside of the handlebars. The Anti-Vibration Bar Insert kit comes with different end caps to work with most common wrap around handguards.

 

Features


    1. Reduces fatigue & armpump

      The design and materials used provides a smooth and incredibly controlled feel at the hands.


    1. Used by the best

      Many factory teams throughout the world use our anti-vibration inserts to increase control.


    1. Fits most aluminum handlebars

      We’ve created a few variations to fit almost any type of aluminum handlebar. They also work with most full-wrap handguards.


  1. 100% American Made.

    Take pride in where you purchase your products; we build 100% of this product right here in the US.

What’s in the box


  1. (2) anti-vibration inserts
  2. All pieces necessary for a complete installation

 

 

 

Application Chart

Applications Part Number
Flexx Handlebars ABI-200
7/8″ Aluminum (Renthal and most other aluminum 7/8″) ABI-200
1 1/8″ Aluminum (Renthal Fat Bar, Pro Taper and most oversized aluminum bars with 13.5mm I.D.) ABI-200
All Twin Wall / Double Wall ABITW-300

 

 

Handguard Installation Instructions

  1. Lightly Lubricate the o-ring and bar insert. To much grease will cause the bar insert to spin. Before installing in pro-taper style bars, remove the o-ring and install the insert to make sure that it fits all the way in. If it fits easily, try it with the o-ring on. The o-ring is optional, it may have to be removed on some bars.
  2. Install the bar insert by pushing only on the allen bolt with a 5mm allen wrench. If you press on the bar insert cap, you will not be able to push it all the way in. This will also damage the expansion piece.
  3. If installing with hand guards follow the diagram to the right.
  4. Tighten allen bolt snug, not too tight. Apply the grip over the bar and Bar Insert on the left side. Slide the throttle tube over the bar and Bar Insert on the right side.

Handguard Removal Instructions

  1. Loosen allen bolt and remove expansion piece. Reinstall the bolt and grab it with channel locks/pliers.
  2. Gently pull or pry on the Bar Insert out of the bar.

 

Handguard Installation


 

 

 

Installation Instructions

 

Handguard Installation