Flexx Handlebar Bends - Mini

Flexx Handlebar Bend Charts

We spend more time on ergonomics than any other brand, we'd love to help you select the correct bend for your preferences, needs and goals.  Shoot us a call or email to discuss.  

A. Sweep
Shown in degrees/millimeters


B. Mid Section
Quad bends have a 7.25" center section, while Moto bends have 8.25".


C. Overall Width
Measured from handle end to handle end in inches


D. Height
High / low measured in millimeters

 

Flexx Handlebar Notations and Definitions

            • Cross Reference bar chart Please see the bottom of the page for a complete cross reference list of popular bar bends from other manufactures as well as OEM offerings. Please email or call us if you don’t see the bend cross reference you are looking for or you need help choosing the correct bend.
            • KTM/Husqvarna 50/65/85 require oversize bar mounts.  KTM offers them in 3 different heights. Here are the heights and part #'s for the lower part of the bar mount: 32mm (KTM part #59401039032), 37mm (KTM part#59401039037), and 42mm (KTM part#59401039042). The lower bar mounts need to be paired with upper bar mount, part#77201038000.  We also suggest using KTM 35mm long bar mount bolts, part#0032100356S to secure the lower mounts to the triple clamp.
            • Damper Crossbars to accommodate over the bar steering dampers. Damper Crossbars can be added to any Flexx Handlebar. Submount dampers do not require use of damper crossbars.
            • Mini/Enduo Our Mini bar is 29 inches wide and our Enduro bar is 31 inches wide. Both are built on the same center section. Our Mini bar has 8 inches of control mounting room on each side, our Enduro has 9 inches of control mounting room. The Enduro bar might be applicable for a bigger mini rider who's about to transition to big bikes.
            • All Flexx Handlebars require a 1 1/8" bar clamps.
            • All bars are shipped with silver bar pads – many other colors are available. 

 

 

Handlebar Bend Options

10 Degree Bends (A) Sweep (C) Width (D) Height Part Number
10* Enduro Low 10*/40 31 63 FL-1000-10-31
10° Enduro 10° / 40 31 92 FL-1001-10-31
10° Enduro Damper Crossbars 10° / 40 31 92 FL-1001-10-31SD
10° Enduro High 10° / 40 31 116 FL-1003-10-31
10° Mini High 10° / 40 29 116 FL-1002-10-29
10° Mini High Damper Crossbars 10° / 40 29 116 FL-1002-10-29SD
10° Mini Low 10° / 40 29 63 FL-1000-10-29
10° Mini 10° / 40 29 92 FL-1001-10-29
10° Mini Damper Crossbars 10° / 40 29 92 FL-1001-10-29SD
12 Degree Bends (A) Sweep (C) Width (D) Height Part Number
12° Enduro Low 12° / 54 31 63 FL-1000-12-31
12° Enduro 12° / 54 31 92 FL-1001-12-31
12° Enduro Damper Crossbars 12° / 54 31 92 FL-1001-12-31SD
12° Enduro High 12° / 54 31 116 FL-1003-12-31
12° Enduro High Damper Crossbars 12° / 54 31 116 FL-1003-12-31SD
12° Mini High 12° / 54 29 116 FL-1002-12-29
12° Mini High Damper Crossbars 12° / 54 29 116 FL-1002-12-29SD
12° Mini 12° / 54 29 92 FL-1001-12-29
12° Mini Damper Crossbars 12° / 54 29 92 FL-1001-12-29SD
12° Mini Low 12° / 54 29 63 FL-1000-12-29
14 Degree Bends (A) Sweep (C) Width (D) Height Part Number
14° Enduro Low 14° / 57 31 63 FL-1000-14-31
14° Enduro 14° / 57 31 92 FL-1001-14-31
14° Enduro Damper Crossbars 14° / 57 31 92 FL-1001-14-31SD
14° Enduro High 14*/57 31 116 Fl-1003-14-31
14° Enduro High Damper Crossbars  14*/57 31 116 FL-1003-14-31SD
14° Mini High 14° / 57 29 116 FL-1003-14-29
14° Mini High Damper Crossbars 14° / 57 29 116 FL-1003-14-29SD
14° Mini Low 14° / 57 29 92 FL-1001-14-29
14° Mini Low Damper Crossbars 14° / 57 29 92 FL-1001-14-29
15 Degree Bends (A) Sweep (C) Width (D) Height Part Number
15° Enduro 15° / 62 31 92 FL-1001-15-31
15° Enduro Damper Crossbars 15° / 62 31 92 FL-1001-15-31SD
15º Enduro High 15° / 62 31 116 FL-1003-15-31
15º Enduro High Damper Crossbars 15° / 62 31 116 FL-1003-15-31SD
15° Mini High 15° / 62 29 116 FL-1002-15-29
15° Mini High Damper Crossbars 15° / 62 29 116 FL-1002-15-29SD
15° Mini Low 15° / 62 29 92 FL-1001-15-29
15° Mini Low Damper Crossbars 15° / 62 29 92 FL-1001-15-29SD

 

Popular Bends from Other Brands (Cross Reference)

Model (A) Sweep (C) Width (D) Height Comparable Flexx Handlebar
CR High 62 795 95 15° Moto
RC High 54 802 119 12° Moto High
971 54 802 99 12° Moto
RC 54 802 99 12° Moto
Windham/MC 57 803 92 14° Moto
YZF 2007-2012 62 795 90 15° Moto
Jimmy Button 67 807 110 15° Moto High
Stewart 55 805 93 12° Moto

 

KTM/HUSQ stock bend cross reference

KTM Item Number Model Description A Sweep C Width D Height Comparable Flexx Handlebar
451.02.001.000 50 SX NEKEN 42 595 78 10* Mini Low
461.02.001.000 65 SX NEKEN 46 750 87 10* Mini Low
U6950996 50 RENTHAL 50 MINI 44 642 84 10* Mini
U6950997 65 RENTHAL65 MINI 53 740 115 12* Mini High
KTM 85 SX 2013+ Renthal 831 50 779 88 10* Enduro
OEM Cross Reference

 

 

Manufacturer / Model Comparable Flexx Handlebar Notes 
Honda
CR 85 12° Mini Requires oversize mounts
CRF 150 12° Mini Requires oversize mounts
Kawasaki
KX 65 12° Mini Requires oversize mounts
KX 85/100 12° Mini Requires oversize mounts
KX 125/250 12° Moto Requires oversize mounts
Husqvarna
TC 65 10* Mini Low
Suggested trim width 28.5".  Requires oversize mounts, KTM part #'s and ergonomic notes are below. 
TC 50 10* Mini Low
Suggested trim width 28".  Requires oversize mounts, KTM part #'s and ergonomic notes are below. 
KTM
KTM 85/105 10° Enduro  
KTM 65 10° Mini Low 
Suggested trim width 28.5".  Requires oversize mounts, KTM part #'s and ergonomic notes are below. 
KTM 50 SX 10° Mini Low   Suggested width trimmed to 28".   Requires oversize mounts, KTM part #'s and ergonomic notes are below. 
Suzuki
RM 85 12° Mini Requires oversize mounts
RM 125/250 14° Moto Requires oversize mounts
Yamaha
YZ 65/85 '18+ 10° Mini Low