Flexx E-MTB

$ 324.99

The Flexx E-MTB, taming the trail up and downhill...

Flexx Handlebars are precise in the steering path, yet forgiving in the load path of the suspension, yielding un compromised control and abuse reduction. Built from 7075, the pivot point is the back bone of our design, providing rigidity to channel the abuse to the elastomers. Flexx Handlebars provide the feedback of a traditional bar while taking the edge off of the abuse.

Flexx Handlebars are made in the USA. Our carbon bar uses ethically produced UD carbon fiber handles, 7075 aluminum, and titanium hardware mates the components together and retain the elastomers. Our alloy bar is made from 7075 aluminum and titanium.

**PLEASE CLICK HERE for more detailed E Bike information.

Elastomers included: Soft (blue), medium (yellow), hard (red), and extra hard (black). Compression and rebound. For more elastomer info, click HERE.

Recommended Elastomer Combinations:

BLUE: XC/Gravel, youth, lightweight riders, 140lbs or less

YELLOW: XC/Trail/mild Enduro, 140-165lbs

RED: Enduro/DH, 150lbs-220lbs, most popular set up

BLACK: DH 190lbs +

- A properly tuned Flexx Handlebar should feel natural while riding, absorbing small bumps, chatter and other trail terrain that tends to make your hands and upper body more fatigued. Any diving sensation, bottoming out or "that doesn't feel right" is an indication your set up is too soft.

*The pin end caps do not need to be removed to change elastomers, use blue loctite on the nut and bolt when re-assembling

All Flexx Handlebars will ship with natural titanium hardware. To purchase Black Ti, Oil Slick Ti, or Burnt Blue Ti hardware, CLICK HERE.

Tech Specs

Rise: 25mm

Clamp Diameter: 31.8mm

Weight: 450 grams (Carbon) and 550 (Alloy)

Width: 800mm

Upsweep: 5°

Back sweep: 8°

Center Tube Width: 63mm

Materials: American Made UD carbon, 7075 Aluminum, Ti-6Al-4V

Effective suspension travel: 5°, length of bar dictates overall travel.

Patent#6,860,500

Damage and craftsmanship warranty information.